V-shaped clamp
Simple assembly: Commonly used tools can be employed.
Category:
Product Center
Keywords: turbo worm clamp, fixed hanging clamp, T-type clamp, V-type clamp, high-strength clamp
Message
Product Description
1. Simple assembly: Commonly used tools can be employed.
2. It features an integral sealing design—simply tightening a single bolt completes the entire clamp’s tightening and sealing process, saving installation time and reducing installation costs.
3. Compared to traditional flange connection and installation, the V-type clamp requires less installation space, making it suitable for installation environments with limited space.
4. Compared to traditional flange connections, the V-shaped clamp is lighter in weight, significantly reducing the overall weight of the system.
The V-shaped clamp is suitable for connecting two flat surfaces with angled contact surfaces. By tightening the fastening screws on the slot-type clamp, the tensile force exerted by the screws generates a downward force perpendicular to the diameter of the clamp (as shown in the right diagram). This force, F1, is then resolved into two horizontal forces acting along the clamp slots and the two contacting surfaces being joined, as indicated by F2 in the diagram. Through the sealing structure of the clamp slots, the two flanges being connected are pressed tightly together, thereby achieving a secure seal between the two components.
Fastening method
Hoop material composition: Other materials can be customized upon request.
| Material abbreviation | Bolt fastening component material | Groove clamp | Outer hoop material | Salt Spray Test |
| W2 | 35# carbon steel | Stainless steel 304 | Stainless steel 304 | ≥72h |
| W4 | Stainless steel 304 | ≥120h | ||
Selection Reference:
1. Determine the operating or test pressure based on the application.
2. Determine the maximum operating temperature that the clamp can withstand (the maximum temperature designed in this document is 400℃).
3. The inner diameter of the clamp = the outer diameter of the flange + 3 mm
4. The clamp thicknesses listed in the table below (approximate values under ideal conditions) will be affected by the following factors in practical applications.
a Sealing type and material b Roughness of the flange surface c Operating temperature d Bending load e Pressure peak f Vibration a g Safety factors required for operation h The safety factor may necessitate increasing the clamp thickness
Experimental torque PD = Assembly torque + 2 Nm
| Bandwidth | Bolt size | Assembly Torque (AD) |
| 20mm | M6 | 8Nm |
| 25mm | M8 | 12Nm |
| 27mm | M12 | 60Nm |
| 30mm | M12 | 60Nm |
| Product Number | Typing | Thickness × Width (mm) | V-shaped chip size | Note | ||||
| Angle n ± 2° | Bottom groove width B ± 0.1 | Slot height C | Clamp diameter d | Use bolts | Use a nut. | |||
| SV20/W2/55 | YIGE 55 | 1.5 × 20 | 40° | 7 | 5 | ①58 | M6×82 bend | M6×10 with disc |
| SV20/W2/60-1 | YIGE 60-1 | 1.5 × 20 | 40° | 6.6 | 6 | φ63 | M6×82 bend | M6×10 with disc |
| SV20/W2/60-2 | YIGE 60-2 | 1.5 × 20 | 40° | 3.6 | 6 | φ60 | M6×82 bend | M6×10 with disc |
| SV20/W2/66 | YIGE 66 | 1.5 × 20 | 40° | 5.4 | 6 | φ69 | M6×82 bend | M6×10 with disc |
| SV20/W2/70 | YIGE 70 | 1.5 × 20 | 40° | 5.5 | 6 | φ73 | M6×82 bend | M6×10 with disc |
| SV20/W2/74 | YIGE 74 | 1.5 × 20 | 40° | 6.4 | 5 | Φ77 | M6×82 bend | M6×10 with disc |
| SV20/W2/79 | YIGE 79 | 1.5 × 20 | 40° | 7 | 4.5 | Φ82 | M6×82 bend | M6×10 with disc |
| SV20/W2/79-2 | YIGE 79-2 | 1.5 × 20 | 40° | 8.4 | 4.5 | φ82 | M6×82 bend | M6×10 with disc |
| SV20/W2/82 | YIGE 82 | 1.5 × 20 | 40° | 4.9 | 4 | ①82 | M6×82 bend | M6×10 with disc |
| SV20/W2/87 | YIGE 87 | 1.5 × 20 | 40° | 10.1 | 6.5 | φ90 | M6×82 bend | M6×10 with disc |
| SV20/W4/90 | YIGE 90 | 1.5 × 20 | 40° | 5.9 | 6.5 | ①93 | M6×82 bend | M6×10 with disc |
| SV20/W2/92 | YIGE 92 | 1.5 × 20 | 40° | 3.6 | 6 | ①92 | M6×82 bend | M6×10 with disc |
| SV20/W2/95 | YIGE 95 | 1.5 × 20 | 40° | 5 | 7 | ①95 | 1/4-28/304 | 1/4-28 Silver-plated/304 |
| SV20/W2/97 | YIGE 97 | 1.5 × 20 | 40° | 7.8 | 8 | φ97 | M6×82 bend | M6×10 with disc |
| SV20/W2/107 | YIGE 107 | 1.5 × 20 | 40° | 6.2 | 6.5 | φ110 | M6×82 bend | M6×10 with disc |
| SV20/W2/110 | YIGE 110 | 1.5 × 20 | 40° | 5.3 | 7 | ①110 | M6×82 bend | M6×10 with disc |
| SV20/W2/112-1 | YIGE 112 | 1.5 × 20 | 40° | 8.1 | 5.5 | ①115 | M6×82 bend | M6×10 with disc |
| SV20/W2/116.4 | YIGE 116 | 1.5 × 20 | 40° | 8 | 6.5 | ①119 | M6×82 bend | M6×10 with disc |
| SV20/W2/122 | YIGE 122 | 1.5 × 20 | 40° | 6.8 | 6 | ①124 | M6×82 bend | M6×10 with disc |
| SV20/W2/122-2 | YIGE 122 | 1.5 × 20 | 40° | 5.1 | 7 | ①122 | M6×82 bend | M6×10 with disc |
| SV20/W2/125 | YIGE 125 | 1.5 × 20 | 40° | 8.9 | 8 | ①128 | M6×82 bend | M6×10 with disc |
| SV20/W2/127 | YIGE 127 | 1.5 × 20 | 40° | 6.5 | 5.6 | ①130 | M6×82 bend | M6×10 with disc |
| SV20/W2/127-1 | YIGE 127-1 | 1.5 × 20 | 40° | 10 | 7 | ①127 | M6×82 straight | M6×10 with disc |
| SV20/W2/119 | YIGE 122 | 1.5 × 20 | 40° | 5.1 | 7 | ①122 | M6×91 bend | M6×10 with disc |
| SV20/W2/135 | YIGE 135 | 1.5 × 20 | 40° | 7 | 6 | ①135 | M6×91 straight | M6×10 with disc |
| SV20/W2/134.5 | YIGE 134.5 | 1.5 × 20 | 40° | 7.4 | 4.1 | ①134.5 | 1/4-28 | 1/4-28 |
| SV20/W2/138 | YIGE 138 | 1.5 × 20 | 40° | 8 | 6 | ①138.5 | M6×91 straight | M6×10 with disc |
| SV20/W2/160 | YIGE 160 | 1.5 × 20 | 40° | 10.2 | 8.6 | ①160 | M6×82 straight | M6×10 with disc |
Customization is available for specifications, models, or dimensions beyond those listed above; 3D models can also be provided.
Existing V-shaped clamp hook groove dimensions
| Product Number | Typing | Thickness × Width (mm) | V-shaped chip size | Note | ||||
| Angle n ± 2° | Bottom groove width B ± 0.1 | Slot height C | Clamp diameter d | Use bolts | Use a nut. | |||
| SV17/W4/162.5 | YIGE 162.5 | 310S 1.8×17 | 40° | 7.2 | 3.6 | Φ162.5 | 1/4-28/304 | 1/4-28 Silver-plated/304 |
| SV25/W4/87 | YIGE 87 | 1.2 × 25 | 40° | 10.1 | 6.5 | φ90 | M8×90 | M8+M8 with disc |
| SV25/W4/97 | YIGE 97 | 1.5 × 25 | 40° | 7.8 | 8 | φ97 | M8×83 | M8+M8 with disc |
| SV25/W4/102-2 | YIGE 102-2 | 1.2 × 25 | 40° | 6.6 | 6.5 | ①106 | M8×83 | M8+M8 with disc |
| SV25/W4/108 | YIGE 108 | 1.2 × 25 | 40° | 11 | 7 | Φ108 | M8×90 | M8+M8 with disc |
| SV25/W4/115 | YIGE 115 | 1.2 × 25 | 40° | 12.2 | 6.5 | φ118 | M8×90 | M8+M8 with disc |
| SV25/W4/117 | YIGE 117 | 1.2 × 25 | 40° | 12 | 7 | Φ117.35 | M8×83 | M8+M8 with disc |
| SV25/W4/117-1 | YIGE 117 | 1.2 × 25 | 40° | 12.2 | 6.5 | φ119 | M8×90 | M8+M8 with disc |
| SV25/W4/116 | YIGE 116 | 1.2 × 25 | 40° | 6.6 | 6.5 | φ119 | M8×90 | M8+M8 with disc |
| SV25/W4/119 | YIGE 116 | 1.2 × 25 | 40° | 7.6 | 6.5 | φ119 | M8×90 | M8+M8 with disc |
| SV25/W4/118 | YIGE 118 | 1.2 × 25 | 40° | 11.6 | 7 | Φ121 | M8×90 | M8+M8 with disc |
| SV25/W4/120 | YIGE 120 | 1.2 × 25 | 40° | 10.2 | 7 | φ120 | M8×90 | M8+M8 with disc |
| SV25/W4/119-1 | GH-F100 | 1.2 × 25 | 40° | 9 | 7 | Φ119.6 | M8×90 | M8+M8 with disc |
| SV25/W4/130 | YIGE 130 | 1.2 × 25 | 40° | 5 | 8 | Φ130 | M8×90 | M8+M8 with disc |
| SV25/W4/132 | YIGE 132 | 2.7 × 30 | 40° | 6.1 | 6 | Φ135 | M8×90 | M8+M8 with disc |
| SV25/W4/135 | YIGE 135 | 1.2 × 25 | 40° | 6.9 | 6.5 | Φ135.5 | M8×90 | M8+M8 with disc |
| SV25/W4/133 | YIGE 133 | 1.2 × 25 | 40° | 8.5 | 7 | φ133 | M8×90 | M8+M8 with disc |
| SV25/W4/138 | YIGE 138 | 1.2 × 25 | 40° | 8 | 6 | Φ138 | M8×90 | M8+M8 with disc |
| SV25/W4/139 | YIGE 139 | 1.2 × 25 | 40° | 10 | 6 | Φ142 | M8×90 | M8+M8 with disc |
| SV25/W4/143 | YIGE 143 | 1.2 × 25 | 40° | 9 | 5 | Φ143 | M8×90 | M8+M8 with disc |
| SV25/W4/140 | YIGE 140 | 1.2 × 25 | 40° | 13.8 | 7 | Φ142 | M8×90 | M8+M8 with disc |
| SV25/W4/140-1 | YIGE 140- | 1.2 × 25 | 40° | 12.5 | 8 | ①143 | M8×90 | M8+M8 with disc |
| SV25/W4/140-2 | YIGE 140-2 | 1.2 × 25 | 40° | 6.9 | 6 | ①143 | M8×90 | M8+M8 with disc |
| SV25/W4/146 | YIGE 146 | 1.2 × 25 | 40° | 9.6 | 7 | ①149 | M8×90 | M8+M8 with disc |
| SV25/W4/149 | YIGE 149 | 1.5 × 25 | 40° | 11 | 7 | φ149 | M8×90 | M8+M8 with disc |
| SV25/W4/150 | YIGE 150 | 1.5 × 25 | 40° | 8 | 7 | φ153 | M8×90 | M8+M8 with disc |
| SV25/W4/150-2 | YIGE 150-2 | 1.5 × 25 | 40° | 6 | 8 | ①152 | M8×90 | M8+M8 with disc |
| SV25/W4/150-4 | YIGE 150-4 | 1.5 × 25 | 40° | 10.2 | 7 | ①150 | M8×90 | M8+M8 with disc |
| SV25/W4/158 | YIGE 158 | 1.5 × 25 | 40° | 8 | 7 | ①161 | M8×90 | M8+M8 with disc |
| SV25/W4/158-1 | YIGE 158 | 1.5 × 25 | 40° | 9.9 | 9 | φ161 | M8×90 | M8+M8 with disc |
| SV25/W4/159 | YIGE 159 | 1.5 × 25 | 40° | 10.2 | 8.6 | ①159 | M8×90 | M8+M8 with disc |
| SV25/W4/168 | YIGE 168 | 1.5 × 25 | 40° | 10.9 | 8.5 | ①168 | M8×90 | M8+M8 with disc |
| SV25/W4/203 | YIGE 203 | 1.5 × 25 | 40° | 9.4 | 8.9 | ①203 | M8×90 | M8+M8 with disc |
| SV25/W4/210 | YIGE 210 | 1.5 × 25 | 40° | 8.9 | 9 | ①213 | M8×90 | M8+M8 with disc |
| SV30/W4/226 | YIGE 226 | 1.5 × 30 | 40° | 15 | 11 | ①226 | M8×90 | M8+M8 with disc |
| SV25/W4/227 | YIGE 227 | 1.5 × 25 | 40° | 10.2 | 7.5 | φ227 | M8×90 | M8+M8 with disc |
| SV25/W4/235 | YIGE 235 | 1.5 × 25 | 40° | 8.5 | 9.3 | φ235 | M8×90 | M8+M8 with disc |
| SV25/W4/237 | YIGE 237 | 1.5 × 25 | 40° | 5.9 | 7 | ①240 | M8×90 | M8+M8 with disc |
| SV30/W4/247 | YIGE 247 | 2.0 × 30 | 40° | 8.4 | 10.5 | φ247 | M8×90 | M8+M8 with disc |
| SV25/W4/268 | YIGE 268 | 2.0 × 25 | 40° | 7.9 | 8 | φ268 | M8×90 | M8+M8 with disc |
| SV25/W4/278 | YIGE 278 | 2.0 × 25 | 40° | 10.2 | 8 | φ278 | M8×90 | M8+M8 with disc |
| SV25/W4/290 | YIGE 290 | 2.0 × 25 | 40° | 8 | 7.1 | φ290 | M8×90 | M8+M8 with disc |
| SV25/W4/300 | YIGE 300 | 2.0 × 25 | 40° | 10.2 | 7.1 | ①303 | M8×90 | M8+M8 with disc |
| SV27/W4/310 | YIGE 310 | 2.75 × 27 | 40° | 8.3 | 7.5 | φ310 | M12×70 | Strong column + gasket |
| SV27/W4/310-1 | YIGE 310 | 2.75 × 27 | 40° | 9.5 | 8 | ①310 | M12×70 (A2-70) Silver-plated | 321 Heavy-Duty Column + Gasket |
| SV25/W2/327.4 | YIGE 327 | 2.0 × 25 | 40° | 10.9 | 10.6 | ①327.4 | M8×90 | M8+M8 with disc |
| SV25/W4/340 | YIGE 340 | 2.0 × 25 | 40° | 10.2 | 7.1 | ①343 | M8×90 | M8+M8 with disc |
| SV27/W4/366-1 | YIGE 366-1 | 3.0 × 27 | 40° | 9.5 | 8 | ①366 | M12×70 | Strong column + gasket |
| SV27/W4/366-2 | YIGE 366-2 | 3.0 × 27 | 40° | 9.5 | 8 | Φ366 | M12×70 | Strong column + gasket |
| SV30/W4/442 | YIGE 442 | 3.0 × 30 | 40° | 9 | 8 | φ442 | M12×120 | Strong column + gasket |
| SV27/W4/526 | YIGE 526 | 3.0 × 27 | 40° | 9.5 | 8 | φ526 | M12×70 | Strong column + gasket |
Customization is available for specifications, models, or dimensions beyond those listed above; 3D models can also be provided.
Previous Page
Next Page
Previous Page
Next Page
Product
The FCS modular cable sealing assembly is a modular sealing system whose key features are simplicity and reliability.
The connection port does not require any special handling.
Surface treatment of carbon steel using metallic materials
Inquire Now
If you are interested in our products, please leave your email and we will contact you as soon as possible, thank you!
Products include turbo worm clamp series, fixed hanging clamp series, T-type clamp series, V-type clamp series, high-strength clamp series, gasket clamp series, exhaust pipe clamp series, radial spring clamp series, spiral clamp series, air filter clamp series, off-road stage IV emission after-treatment clamp base series, urea tank clamp base series, and thousands of other specifications.
Contact Information
Email:
Address:
Chongqing Jiangjin Luohuang Industrial Park, Changhe Area C28-02/01