T-shaped clamp
Bolt head spiral spring design
Category:
Product Center
Keywords: turbo worm clamp, fixed hanging clamp, T-type clamp, V-type clamp, high-strength clamp
Message
Product Description
Product features:
1. Bolt head spiral spring design
2. Possesses dynamic adjustment characteristics
3. Provides 360-degree compensation for hose contraction.
4. Automatically tightens in low-temperature environments to prevent leaks.
5. The recommendation applies only to gas line connections.
6. It can be used as a powerful clamp in applications requiring high torque.
Product Material Composition and Corrosion Resistance
| Material abbreviation | Bolt | Nut | Spring | Three-way joint | Strap and transition bridge | Salt spray test |
| W2 | 35# carbon steel | 35# carbon steel | 65Mn | Stainless steel 201 or 304 | Stainless steel 201 or 304 | 72h |
Spring T-clamp torque value
| With spring and without spring | All specifications | Materials | AD Nm | PD Nm | BD min Nm |
| W2 | 10 ± 0.5 | 12.0 | 15.0 |
Torque Notes: AD Recommended Tightening Torque PD Experimental Torque BD Failure Torque
T-clip selection criteria = outer diameter of the hose plus 3 mm.
| Adjustment range d(mm) | Materials | Springless order number | Pipe diameter φ | Materials | Spring-loaded order number | Pipe diameter φ |
| 70-78 | W2 | ST/W2/70-78 | 75 | W2 | TH/ST/W2/70-78 | 75 |
For other specifications and models of T-type clamps, the tightening adjustment range should be set within a range 3 mm larger and 5 mm smaller than the outer diameter of the rubber hose, and this principle applies similarly to other sizes.
Note:
1. The order format for T-clamps without springs is described as (ST/W2/70-78).
2. The order format for T-clamps with springs is described as (TH/ST/W2/70-78).
Application Instructions:
1. At installation locations where the assembly torque of standard turbine worm clamps fails to meet the requirements, powerful clamps can be used instead.
2. Spring T-clamps are primarily used in piping systems—such as chilled and heated exchange systems—where temperature differences vary significantly.
Previous Page
Next Page
Previous Page
Next Page
Product
The FCS modular cable sealing assembly is a modular sealing system whose key features are simplicity and reliability.
The connection port does not require any special handling.
Surface treatment of carbon steel using metallic materials
Inquire Now
If you are interested in our products, please leave your email and we will contact you as soon as possible, thank you!
Products include turbo worm clamp series, fixed hanging clamp series, T-type clamp series, V-type clamp series, high-strength clamp series, gasket clamp series, exhaust pipe clamp series, radial spring clamp series, spiral clamp series, air filter clamp series, off-road stage IV emission after-treatment clamp base series, urea tank clamp base series, and thousands of other specifications.
Contact Information
Email:
Address:
Chongqing Jiangjin Luohuang Industrial Park, Changhe Area C28-02/01